Completed F-250 / APG Customs

Built from the ground up.

This 2026 Ford F-250 brings together a Carli Pathfinder suspension, KMC Impact wheels and 37-inch Toyo RT Pro tires. Look closer at the hardware and the installation behind the finished fitment.

Plan your F-250 build Explore the details

Front wheel and tire of the completed Ford F-250, with Carli suspension hardware visible inside the wheel well — 01 / Carli Pathfinder fitment Carli hardware, KMC wheel, Toyo tire.

The finished truck

See the whole F-250.

Low front three-quarter view of the completed black 2026 Ford F-250 Carli Pathfinder build — Carli Pathfinder with KMC and Toyo fitment

Level front-side view showing the full completed black 2026 Ford F-250 — 37-inch Toyo RT Pros on KMC Impact wheels

The build in focus

The work lives in the details.

The Pathfinder package is the center of this build. APG installed its shocks, steering stabilizers, sway bar, radius arms and limit straps, then fitted the wheel and tire package, programmed the sensors and aligned the truck. The photos show the finished F-250 and the hardware beneath its stance.

Underneath the finish

Suspension, in view.

Underside of the completed Ford F-250 showing Carli suspension components and front axle hardware — 02 / Installed suspension
Carli Pathfinder hardware installed around the F-250's front axle.

Installed at APG Customs

What went into this F-250.

Exact parts and installation work confirmed for the photographed build.

Carli Pathfinder suspension

Carli Pathfinder package, CS-FLVL-PF-23
Custom-tuned Carli-SPEC 2.5 remote-reservoir shocks
High-mount and low-mount steering stabilizers
Fixed-rate torsion sway bar with stainless steel end links
Fabricated radius arms and weld-on limit straps

Wheel and tire fitment

Four KMC Impact 18×9 +0 wheels in Matte Black
Four Toyo RT Pro 37×13.50R18 tires
Matte black lug nuts
Four Autel TPMS sensors, programmed to the truck

The shop work

Pathfinder suspension and supporting hardware installed
Wheels and tires mounted and balanced
TPMS sensors programmed
Alignment completed after installation

Carli specifies 3.5 inches of front lift for standard F-250 configurations and 1.5 inches for Tremor configurations. APG can confirm the right package and fitment for your exact truck.

Closer to the Carli hardware

The details beneath the stance.

Carli 2.5 remote reservoir and coil spring inside the wheel well of the completed F-250 — Carli reservoir and spring

Close view of suspension and steering hardware beneath the completed F-250 — Pathfinder steering and suspension hardware

Close view of a Carli-branded suspension arm and mounting hardware on the F-250 — Carli arm and mount

Close view of a Carli shock, coil spring and arm behind the F-250 tire — Shock, spring and arm

Start with your truck

Make the next build yours.

Tell APG about your F-250 and the stance, ride and tire fitment you want. We will discuss the right parts and installation plan for that vehicle.

Discuss your F-250 build Explore Carli suspension at APG